$33.03
For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Holds pipe 3" from wall. Galvanized. Length From Wall: 3 In. \nMaterial: Galvanized \n...
$31.30
For use on the outside wall as a trim plate or exterior shield. Use only with Selkirk pellet stove pipe. Overall size is 12-1/2 X 12-1/2. Overall Size: 12-1/2 In. x 12-1/2 In. \nMaterial: Galvanized \n...
$32.18
Support assembly for gas vent pipe. Supports pipe as you are going through a ceiling. Support plate also serves as a firestop. Will support a maximum of 35' of gas vent. Size refers to the inside diameter of the pipe or fitting....
$178.14
Stainless steel outer casing and inner liner. Double-wall pipe with solid pack insulation. Tested to withstand 2100 F (degree Fahrenheit). UL (Underwriters' Laboratories) listed....
$34.10
Support assembly for gas vent pipe. Supports pipe as you are going through a ceiling. Support plate also serves as a firestop. Will support a maximum of 35' of gas vent. Size refers to the inside diameter of the pipe or fitting....
$70.77
(DSA)-without coupler. For use in retrofit installations, this part can be installed from below with a finish support package and secured with screws....
$78.75
3" 90 deg (degree) angle elbow. Type L insulated pipe for pellet stove applications. Used to orient pipe between vertical and horizontal orientation. Factory sealed at couplers to prevent leakage. Size: A = 5-13/16....
$360.13
For installation of a chimney in a cathedral or pitched ceiling such as standard A-frame construction....
$56.61
Exit cap for pellet stove pipe, 5-3/4" high for 3" pipe. Galvanized. Size: 3 In. \nHeight: 5-3/4 In. \nFinish: Galvanized \nMaterial: Stainless Steel \n...
$98.51
3" tee with cap. Type L insulated pipe for pellet stove applications. 3" diameter. Sizes: A 9", B 4-1/2". Type: Type L Insulated \nDiameter: 3 In. \nHeight: 9 In. \nFinish: Unpainted \nMaterial: Stainless Steel Liner & Galv Jacket \n...
$13.88
Used to provide a weatherproof seal to pipe above roof line. Used above the flashing. Seal inner edge with hi-temp silicone sealant. Type B gas vent. Size: 3 In. \nA Size: 1-9/16 In. \nB Size: 6-5/8 In. \nMaterial: Aluminum \n...
$77.12
Type L insulated 3" adapter for pellet stove applications. SSII pellet stove pipe adapter, used to transition VP Pellet Pipe to Ultra-Temp chimney. Type: Type L Insulated \nFor Use With: Model SSII \nSize: 3 In. \nMaterial: Stainless Steel \n...
$114.89
For use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. Also useful where the pipe connection passes through a combustible interior or exterior wall....
$15.75
Used to provide a weatherproof seal to pipe above roof line. Used above the flashing. Seal inner edge with hi-temp silicone sealant. Type B gas vent. Size: 6 In. \nA Size: 1-9/16 In. \nB Size: 9-5/8 In. \nMaterial: Aluminum \n...
$12.87
Cap to seal off an unused opening in your gas vent pipe. Used at bottom of Tee. Removeable for easy system maintenance. Size refers to the inside diameter of the pipe or fitting. The outside diameter of RV is approximately 1/2" larger. Type B gas vent....
$43.02
Used where the vent passes through a roof. Flat to 6/12. A 4". C 3-1/2" minimum flange dimension. Size refers to the inside diameter of the pipe or fitting. The outside diameter of RV is approximately 1/2" larger. Type B gas vent. Size: 5 In....
$92.64
(DSAC)-with coupler. For use in new installations, this part can be installed by twist-locking the coupler on the DSAC into the first section of Model SSII type HT chimney pipe....
$52.01
External screen prevents entry of most bird species. Aluminum top and galvanized flashing. Slips inside of pipe and locks into place with spring clips. Must not be used for woodburning applications....
$61.90
Used where the vent passes through a roof. Flat to 6/12. A 4". C 3-1/2" minimum flange dimension. Size refers to the inside diameter of the pipe or fitting. The outside diameter of RV is approximately 1/2" larger. Type B gas vent. Size: 6 In....
$59.95
Used when an offset is required to avoid obstructions such as rafters, joists and other construction obstacles. Used to orient pipe between vertical and horizontal orientation. Four piece adjustable elbow twists for easy offsets....